Loading...

Five habits that help industrial oil last longer

Maintenance2 min read

Most oil problems start with contamination or neglect, not with the oil itself. A few simple habits keep dirt, water and the wrong top-up out of your machines.

The five habits

  1. Keep barrels and pails sealed so dust and moisture stay out.
  2. Use clean, dedicated transfer equipment for each type of oil.
  3. Filter or change oil at the intervals the equipment maker gives.
  4. Watch for heat, noise and leaks, which often signal trouble early.
  5. Never top up with an unknown oil, and don't mix grades casually.

Store it properly

Where oil sits before it goes into a machine matters. Store barrels and pails indoors or under cover, off wet ground, and keep lids and bungs closed.

  • If barrels are stored on their sides, position the bungs at 3 and 9 o'clock to cut down on breathing and leaks.
  • Label every container clearly and use older stock first.
  • Keep funnels, pumps and measures clean and tied to one product each.

Look, listen and smell

You don't need a lab to spot early signs. A change in colour, a burnt smell, foaming, unusual noise or a machine running hotter than usual are all reasons to check the oil and the equipment.

Key takeaways

  • Clean storage and clean transfer equipment prevent most contamination.
  • Follow the maker's filter and change intervals.
  • Small signs such as heat, noise and leaks are worth acting on early.
All articles

Need help choosing the right oil?

Tell us the machine and the job. Our team will recommend a grade and send you a quote.