Why viscosity matters
If the oil is too thin, it can't hold a protective film under load. Pumps wear faster and leak internally, so the machine loses pressure and speed.
If the oil is too thick, the system runs hot, starts slowly in cold weather and wastes energy pushing the fluid around. In severe cases the pump struggles to draw the oil in at all.
Common ISO VG grades
Hydraulic oils are sold by ISO VG number, which is the oil's viscosity at 40 °C. A higher number means a thicker oil. These three are the grades you will meet most often.
| Grade | Character | Typically suits |
|---|---|---|
| ISO VG 32 | Lighter | Cooler conditions and systems that need quick response |
| ISO VG 46 | Mid-range | A common all-round choice for many industrial systems |
| ISO VG 68 | Heavier | Hotter or harder-working systems |
How to pick the right grade
- Check the manual for the recommended viscosity and the operating temperature range.
- Think about where the machine works: outdoors in winter, or in a hot workshop all day.
- Consider the pump type and system pressure, since high-pressure pumps can be fussier about viscosity.
- Stay with one grade when topping up, and don't mix grades casually.
- If you're unsure, send us the machine, its operating temperature and the manual's recommendation and we'll help you match a grade.
Key takeaways
- Viscosity that is too low causes wear and internal leakage.
- Viscosity that is too high causes heat, slow starts and wasted energy.
- The manufacturer's recommendation comes first; ISO VG 32, 46 and 68 are the usual choices.