Loading...

Reading a gear oil label: ISO VG, AGMA and EP

Gear oils2 min read

A gear oil pack carries a lot of letters and numbers. Three of them do most of the work: the viscosity grade, the AGMA number and whether the oil is an EP type. Once you can read these, choosing gets easier.

ISO VG: the viscosity

The ISO VG number tells you how thick the oil is at 40 °C. Heavier loads and slower speeds generally call for a thicker grade, while lighter loads and higher speeds suit a thinner one.

AGMA: the same idea on another scale

Many gearbox makers quote an AGMA grade instead. The two scales line up closely, so you can usually translate between them.

AGMA gradeApprox. ISO VG
AGMA 268
AGMA 3100
AGMA 4150
AGMA 5220
AGMA 6320
AGMA 7460
AGMA 8680

Treat these as approximate equivalents and confirm against your gearbox manual.

EP: protection under heavy load

EP stands for extreme pressure. EP oils contain additives that protect gear teeth when loads are heavy or sudden, such as in shock-loaded machinery. For lightly loaded gears a plain mineral gear oil may be enough.

When to be careful

Not every gearbox takes every EP oil. Worm drives with bronze parts, for example, often need a specific type of oil, because some EP additives can attack softer metals.

Key takeaways

  • ISO VG and AGMA both describe viscosity, so match whichever your manual uses.
  • EP additives protect gears under heavy or shock loads.
  • Worm gears and other special designs may need a specific oil type.
All articles

Need help choosing the right oil?

Tell us the machine and the job. Our team will recommend a grade and send you a quote.