Loading...

NLGI grades: which grease for which bearing

Greases2 min read

Grease is oil held in a thickener, and how stiff it is matters as much as what it is made of. The NLGI grade tells you the stiffness, which is the first step in picking the right grease for a bearing.

What the NLGI number means

NLGI grades run from very soft (000) to very hard (6). The grade comes from a standard penetration test that measures how far a cone sinks into the grease. A higher number means a firmer grease.

NLGI gradeFeelTypically used for
0 and 1SoftCentralized greasing systems and colder conditions
2MediumGeneral-purpose bearings; the usual starting point
3FirmSome vertical shafts and higher-temperature duties

Thickener and temperature rating

Stiffness is only part of the story. Common thickeners include lithium, lithium complex, calcium and polyurea, and each behaves differently in heat and water. High temperature and EP greases are made for hot or heavily loaded bearings.

Match the grease to the bearing's temperature and load, not just to its size.

Mixing and quantity

  • Don't mix different greases unless the maker confirms they are compatible. Some thickeners react badly together and the grease can soften or run out.
  • Don't over-grease. Too much grease in a bearing can cause overheating.
  • Follow the relubrication interval the equipment maker gives.

Key takeaways

  • NLGI 2 is the common choice for general bearings.
  • Softer grades flow better in centralized systems and the cold.
  • Check compatibility before mixing, and avoid over-greasing.
All articles

Need help choosing the right oil?

Tell us the machine and the job. Our team will recommend a grade and send you a quote.