Transformer oil
Transformer oil does two jobs. It insulates the live parts of electrical equipment and it carries heat away from them. Because of that, its condition matters.
Moisture, dirt and ageing reduce the oil's insulating strength. That is why transformer oil is tested periodically, typically for dielectric strength, moisture content and acidity.
Thermic fluids
Thermic fluids, also called heat transfer oils, carry heat around closed heating systems and run at high temperatures. Over time, heat and oxygen can break the fluid down, forming sludge and carbon that reduce heat transfer.
Heat the system gradually, keep it within the fluid's rated temperature, and test samples regularly for viscosity, flash point and acidity.
Good practice for both
- Keep oil sealed and handle it with clean equipment to avoid moisture and dirt.
- Don't mix different products unless the supplier confirms compatibility.
- Test on a regular schedule, and replace or treat the oil when the results say so, not before or after.
Key takeaways
- Transformer oil insulates and cools, so moisture and contamination are its enemies.
- Thermic fluids age with heat and need regular testing.
- Let test results, not guesswork, decide when to change.