The SAE grade
A grade such as 15W-40 has two parts. The number before the W (for winter) shows how easily the oil flows when cold. A lower number means easier cold starts. The second number shows how thick the oil stays at normal operating temperature. A higher number means a thicker oil film when the engine is hot.
Multigrade oils like this are made to behave like a thinner oil on a cold start and a thicker one at working temperature, so a single oil can cover a wide range of conditions.
The API rating
The API service rating is a two-letter code. The first letter shows the engine type: S for petrol (spark ignition) and C for diesel (compression ignition). The second letter shows the performance level. A letter later in the alphabet generally means a newer, more demanding specification.
Newer ratings are usually designed to be backward compatible, but not always. Some older engines and some modern diesels with emission equipment have specific needs, so check the equipment maker's requirement rather than assuming.
Choosing and using it
- Start with the grade and rating in the owner's or operator's manual.
- Think about the climate and the duty. Cold starts, heavy loads, dust and long idling all affect how long oil lasts.
- Change the oil and filter at the maker's interval, or sooner in severe conditions.
- Top up with the same grade and rating, and keep the cap and dipstick clean.
Key takeaways
- The number before the W is cold flow; the second number is thickness when hot.
- S rated oils are for petrol engines and C rated oils are for diesel.
- The equipment maker's recommendation always comes first.